Servo energy saving

Yingtu Horizontal injection molding machine

Yingtu Horizontal injection molding machine

   Horizontal injection molding machine: This is the most common type. The mold closing part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its features are: short fuselage, easy to operate and maintain; low center of gravity of the machine, relatively stable installation; after the product is ejected, it can automatically fall down by gravity, easy to realize full-automatic operation. Its disadvantage is: the mold installation is more troublesome, if the insert has been published, the mold may tilt or fall, and the machine occupies a large area. At present, this type of injection molding machine is widely used in the market.
 


Characteristic:
 
Features of horizontal injection molding machine:
 
1. That is, due to the low fuselage of the mainframe, there is no height limit for the plant to be installed.
 
2. When the product can be dropped automatically, it can be formed automatically without the use of a manipulator.
 
3. Due to the low fuselage, convenient material supply and easy maintenance.
 
4. The mould shall be installed by crane.
 
5. Under the parallel arrangement of multiple sets, the molded products are easy to be collected and packed by the conveyor belt
 
Horizontal injection molding machine: This is the most common type. The mold closing part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its features are: short fuselage, easy to operate and maintain; low center of gravity of the machine, relatively stable installation; after the product is ejected, it can automatically fall down by gravity, easy to realize full-automatic operation. Its disadvantage is: the mold installation is more troublesome, if the insert has been published, the mold may tilt or fall, and the machine occupies a large area. At present, this type of injection molding machine is widely used in the market.
 
Characteristic:
 
Features of horizontal injection molding machine:
 
1. That is, due to the low fuselage of the mainframe, there is no height limit for the plant to be installed.
 
2. When the product can be dropped automatically, it can be formed automatically without the use of a manipulator.
 
3. Due to the low fuselage, convenient material supply and easy maintenance.
 
4、 The mould shall be installed by crane.
 
5. Under the parallel arrangement of multiple sets, the molded products are easy to be collected and packed by the conveyor belt
 
Horizontal injection molding machine: This is the most common type. The mold closing part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its features are: short fuselage, easy to operate and maintain; low center of gravity of the machine, relatively stable installation; after the product is ejected, it can automatically fall down by gravity, easy to realize full-automatic operation. Its disadvantage is: the mold installation is more troublesome, if the insert has been published, the mold may tilt or fall, and the machine occupies a large area. At present, this type of injection molding machine is widely used in the market.
 
Characteristic:
 
Features of horizontal injection molding machine:
 
1. That is, due to the low fuselage of the mainframe, there is no height limit for the plant to be installed.
 
2. When the product can be dropped automatically, it can be formed automatically without the use of a manipulator.
 
3. Due to the low fuselage, convenient material supply and easy maintenance.
 
4. The mould shall be installed by crane.
 
5. Under the parallel arrangement of multiple sets, the molded products are easy to be collected and packed by the conveyor belt

 
Get the latest price? We'll respond as soon as possible(within 12 hours)